How To Fix My Iphone 6 Plus Camera

Repair guide : Back Camera iPhone 6S Plus

Level : Easy Time : 20 min Author : Alexandre

245 people have done this repair successfully ! Why not you?

You can't take pictures anymore with your iPhone 6S Plus ? If the back camera is defective, if the app doesn't open, or if the colors are fade, it's time to change this.

SOSav experts have prepared a repair tutorial with all the steps to take for an easy repair. You'll know exactly what to do to have a like new iPhone, without paying expensive money in a shop !

Symptoms :

Blurry pictures
Fade colors
The app does not open
Can't save videos

Some advice before you start

Repair - Repair guide: Back Camera iPhone 6S Plus

Recommended repair kit

Step 1

Before disassembling the back camera of your iPhone 6S Plus, you have to securely turn it off.

Maintain the power button on the top for a few seconds.

Then slide to the right to "power off" button in red.

Your iPhone 6S Plus is now turned off.

Step 2

The iPhone 6S Plus SIM card tray is on the right side of the phone, near the power button (on/off/sleep)

Step 3

With a pentalobe screw driver, remove the two screws circled in red on the picture.

Those screws are on both side of the lightning connector of the phone.

Those two screws maintain the bottom part of the screen on the iPhone's frame.

Step 4

Then put the iSclackon the iPhone 6S Plus.

The suction cups have to be near the home button (at the bottom) as shown on pictures 1 and 2.

Make sure the suction cups are perfectly attached to the iPhone and then close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

A black seal on both sides of the phone and another white one at the top and bottom hold the display assembly to the rear panel.

Step 5

Then lift the display assembly to a 90° angle.

With a cruciform screwdriver, remove the five screws circled in red.

Those screws hold the display assembly connector bracket. You'll be able to remove it using tweezers in the next step.

Step 6

Use tweezers to remove the display assembly connector bracket.

Step 7

With a nylon spudger, gently pry to disconnect the following cables:

Front camera
Earpiece speaker
Proximity and light sensor
Touch screen/LCD screen

Step 8

Still using the spudger, pry again and disconnect the last cable holding the display assembly to the rear case, running the home button.

Step 9

You can lift the complete screen and remove it.

Step 10

Use a cruciform screwdriver to remove the two screws circled in red.

Those screws maintain the back camera bracket.

Step 11

Use a pair of tweezers to remove the back camera bracket.

Step 12

With a nylon spudger, disconnect the camera cable.

Step 13

Still with a nylon spudger, gently take off the camera from its socket.

Step 14

Use a pair of tweezers and remove the camera.

Step 15

The back camera of your iPhone 6S Plus is now disassembled.

You can replace it by a new one.

Recommended repair kit